Payment & Shipping Terms:
|A Force:||8.1N||Pressure:||1 Kg|
|Indenter Shape:||Flat Cone Point (0.79 Mm) 35º Included Angle||Length Of Probe:||2.5 Mm|
leeb hardness tester,
integrated hardness tester
Digital Rubber Hardness Tester Shore A/C/D
Shore digital rubber hardness tester is designed for testing the hardness of soft rubber, printer roller and other elastomer material.(ASTM--D--2240). It has advantages of simple structure, convenient use, small body and light weight, intuitive readings. It can carry the hand-held measurements and can also be installed on the same type of fixed cradle which is matched with the set load test.
Shore rubber durometer is a type of vulcanized rubber and plastic product . It has A , D , and C types.
A and D type apply to the test of low and medium hardness and high hardness material C type is suitable for 50% condensation, 0.049MPa Stress , use rubber and plastic togerther, rubber include the shoes cellual material .
The durometer carry out the provision of GB/T531-99, GB2411-80, HG/T2489-93 and JJG304-2003.
Very convenient to use
Easy to carry
Holding measured display values
Power Supply: one 1.5 V cell battery
Used to test sof t rubber, prnter roller and other elastomer materials
|Model||Shore A||Shore C||Shore D|
|Applications||general rubber, synthetic rubber, soft rubber, poly-resin, leather, wax, etc.||rubber and contains the tiny hole material that that the vesicant is made in being used for plastic||general hard rubber, hard resin, acryl, glass, thermoplastics, printing plates, fibres, etc.|
|Indenter shape||Flat cone point 0.79mm 35º Included Angle||Spherical SR2.5mm||Sharp cone point SR 0.1mm 30º Included Angle|
|Tip stroke||2.5mm||Net weight||0.5kg|
Graduation : 0-100 degree
Indentor running : 0-2:5mm
Indentor press on telos : A , C type 0.55N-8.06N, D type0-44.5N