Paul FrameThank you very much for all your help regarding the SADT Concrete Hammer and hardness tester which are working well and we are very pleased with it.
Iso9001 Simple Structure Digital Rubber Hardness Tester
|Flat Cone Point (0.79 Mm) 35º Included Angle
|Length Of Probe
simple structure digital rubber hardness tester,
iso9001 digital rubber hardness tester,
simple digital rubber hardness tester
Digital Rubber Hardness Tester Shore A/C/D
Shore digital rubber hardness tester is designed for testing the hardness of soft rubber, printer roller and other elastomer material.(ASTM--D--2240). It has advantages of simple structure, convenient use, small body and light weight, intuitive readings. It can carry the hand-held measurements and can also be installed on the same type of fixed cradle which is matched with the set load test.
Shore rubber durometer is a type of vulcanized rubber and plastic product . It has A , D , and C types.
A and D type apply to the test of low and medium hardness and high hardness material C type is suitable for 50% condensation, 0.049MPa Stress , use rubber and plastic togerther, rubber include the shoes cellual material .
The durometer carry out the provision of GB/T531-99, GB2411-80, HG/T2489-93 and JJG304-2003.
Very convenient to use
Easy to carry
Holding measured display values
Power Supply: one 1.5 V cell battery
Used to test sof t rubber, prnter roller and other elastomer materials
|general rubber, synthetic rubber, soft rubber, poly-resin, leather, wax, etc.
|rubber and contains the tiny hole material that that the vesicant is made in being used for plastic
|general hard rubber, hard resin, acryl, glass, thermoplastics, printing plates, fibres, etc.
|Flat cone point 0.79mm 35º Included Angle
|Sharp cone point SR 0.1mm 30º Included Angle
Graduation : 0-100 degree
Indentor running : 0-2:5mm
Indentor press on telos : A , C type 0.55N-8.06N, D type0-44.5N