Payment & Shipping Terms:
|Accuray:||+/-0.1R||Memory:||1000 Parts, 256 Data For Each Part|
|Measuring Range:||10-100N/mm2||Impact Energy:||0.225kgm (2.207Nm)|
|Communication:||USB2.0 Or Bluetooth||Certification:||ISO9001/CE/SGS|
oled display concrete test hammer,
oled rebound concrete test hammer,
Bluetooth rebound concrete test hammer
Digital rebound Hammer Manufacturer Ht-225ds with OLED display Digital Part Separating From Main Body
HT-225DS is an innovation based on the HT-225D, which digital part (data processor) can be separated from main body on site and coupled with mechanical hammer easily by a simple push. So once the mechanical hammer brokes during testing, you can easily exchange another mechanical hammer and continue to work. Its mechanical hammer can work as normal analog test hammer without digital part. HT-225DS means more convenient, more cost saving and more flexible. HT-225DS has Bluetooth and data in memory can be downloaded to PC or micro printer wirelessly by Bluetooth or USB port by cable.
High contrast OLED display
All setup can be made on site
Automatic calculating compressive strength
Automatic correc tion of impact direction
All data will be stored in memory
All data can be transferred to PC by USB cable or Bluetooth
Dual display for analogue ruler and digital value
|Type||Digital / Mechanical 2-In-1|
|Impact Energy||0.225kgm (2.207Nm) For Testing Ordinary Building And Bridge Construction|
|Communication||USB2.0 Or Bluetooth|
|Printing||Bluetooth Micro Printer (Optional)|
|Storage||1000 Parts, 256 Data For Each Part|
|Power Supply||3.7V Li-Ion Rechargeable Battery Charged Via USB Port|
Test times (test point), for each test point in each testing zone, according to Regulations, the test times are 16.
Testing zone, a test unit for testing concrete compressive strength of structure or component, with an appropriate area no more than 0.04㎡.
Equivalent value of concrete strength in testing zone refers to the concrete compressive strength value of the tested unit calculated based on the average rebound value and carbonization depth of testing zone via strength-measuring curve.
Test angle, casting surface, if the rebound apparatus is not in horizontal direction or the tested surface is non-concrete casting side, after setting the test angle and casting surface respectively, the apparatus can automatically conduct angular correction and casting surface correction of rebound value.
Carbonization depth: concrete carbonization depth is a kind of chemical corrosion of concrete, and the process reducing concrete alkalinity is called concrete carbonization. Carbonization depth value can be obtained according to the relevant methods of Regulations. When input carbonization depth, only have to input a number between 0.0mm and 6.0mm and then the apparatus can, according to the input carbonization depth value, calculate the concrete compressive strength value.
Test of pump concrete strength, set the curve as “national-pumping”. According to the Regulations, the apparatus calculate the corrected value of pump concrete strength and strength-measuring curve, and the calculated concrete compressive strength value is the strength value of pump concrete.
Strength-measuring curve, the apparatus has four optional curves in total, “national standard-pumping”, “national standard-non pumping”, “specific curve 1” and “specific curve 2”.
HT-225DS main unit 1
Grinding wheel 1
USB cable 1
USB charger 1
Software CD 1
Operation manual 1
Carrying case 1